Definition of table printer

Printer definitions for attributes, extensions, and abilities. , Table Dump Name printer

Alphabetical Field Summary

cre-date: (DATE) Date record was created

cre-time: (CHAR) Time record was created at

cre-user-name: (CHAR) User who created this record

extern-guid: (CHAR) External Global Unique ID for this record

ptr-binary-init: (CHAR) Sequence to switch into binary mode

ptr-binary-reset: (CHAR) Sequence to reset from binary mode to normal/default mode

ptr-bold-off: (CHAR) Compiled sequence

ptr-bold-on: (CHAR) Compiled sequence

ptr-class: (CHAR) What class of printer is this. (e.g. laser, line, dot-matrix

ptr-cpi[8]: (DECM) Characters Per Inch

ptr-cpi-seq[8]: (CHAR) Compiled

ptr-dbl-off: (CHAR) Compiled

ptr-dbl-on: (CHAR) Compiled

ptr-defcpi: (DECM) The default characters per inch for this printer

ptr-deflpi: (DECM) The default lines per inch for this printer

ptr-desc: (CHAR) Brief description of this printer.

ptr-does-binary: (LOGC) Is this print model capable of binary operation?

ptr-draft: (CHAR) Compiled

ptr-esc-code: (CHAR) Compiled 'escape' code.

ptr-graph-model: (CHAR) The type of graphics device that this printer emulates

ptr-height: (DECM) Height (in inches) of form

ptr-init: (CHAR) Compiled

ptr-leadin: (CHAR) Character used to signify the start of a special sequence

ptr-lpi[4]: (DECM) Number of Lines Per Inch

ptr-lpi-seq[4]: (CHAR) Sequence for Lines Per Inch

ptr-model: (CHAR) The model name used to refer to this printer

ptr-NLQ: (CHAR) Compiled

ptr-reset: (CHAR) Compiled

ptr-set-form-len: (CHAR) Compiled

ptr-ul-off: (CHAR) Compiled

ptr-ul-on: (CHAR) Compiled

ptr-width: (DECM) Width (in inches) of the form

src-binary-init: (CHAR) Sequence to switch into binary mode

src-binary-reset: (CHAR) Sequence to reset from binary mode to normal/default mode

src-bold-off: (CHAR) Sequence to discontinue bold printing

src-bold-on: (CHAR) Character sequence to initiate embolded printing

src-cpi-seq[8]: (CHAR) Sequence to set Characters Per Inch (CPI)

src-dbl-off: (CHAR) Turn double striking off

src-dbl-on: (CHAR) Sequence to cause each character to be double striked

src-draft: (CHAR) Enable 'draft' mode printing (typically high-speed option)

src-esc-code: (CHAR) Sequence to send to printer when an 'escape' is required

src-init: (CHAR) Sequence used to initialize the printer

src-lpi-seq[4]: (CHAR) Sequence to set CPI

src-NLQ: (CHAR) Near Letter Quality mode

src-reset: (CHAR) Sequence to reset printer to default settings

src-set-form-len: (CHAR) Sequence to set the form length to a specified # of lines

src-ul-off: (CHAR) Sequence to discontinue underlining of characters

src-ul-on: (CHAR) Character sequence to initiate underlined printing

upd-date: (DATE) Date record was last updated

upd-time: (CHAR) Time record was last updated

upd-user-name: (CHAR) User who last updated this record

Alphabetical Index Summary

description: ptr-desc

extern-guid: extern-guid

model: (UNIQUE, PRIMARY) ptr-model

Other tables who reference printer

device - System printer devices

printer-line - Printer Line Graphics support/definition file

Tables printer references

printer-line - Printer Line Graphics support/definition file

Detailed Alphabetical Field Listing
cre-date Data type: DATE
Format: 99/99/9999
Help: Date record was created

cre-time Data type: CHARACTER
Format: x(8)
Help: Time record was created at

cre-user-name Data type: CHARACTER
Format: x(16)
Help: User who created this record

extern-guid Data type: CHARACTER
Format: x(32)
Description: External Global Unique ID for this record
Attributes: Index Component

ptr-binary-init Data type: CHARACTER
Format: x(32)
Help: Sequence to switch into binary mode

ptr-binary-reset Data type: CHARACTER
Format: x(32)
Help: Sequence to reset from binary mode to normal/default mode

ptr-bold-off Data type: CHARACTER
Format: x(32)
Description: Compiled sequence
Help: Sequence to start bold printing

ptr-bold-on Data type: CHARACTER
Format: x(32)
Description: Compiled sequence
Help: Sequence to cancel bold printing

ptr-class Data type: CHARACTER
Format: x(10)
Help: What class of printer is this. (e.g. laser, line, dot-matrix

ptr-cpi Data type: DECIMAL (Extent: 8, Decimals: 2)
Format: z9.99 (Initial Value: 0)
Help: Characters Per Inch

ptr-cpi-seq Data type: CHARACTER (Extent: 8)
Format: x(32)
Description: Compiled
Help: Sequence to set CPI

ptr-dbl-off Data type: CHARACTER
Format: x(32)
Description: Compiled
Help: Turn double striking off

ptr-dbl-on Data type: CHARACTER
Format: x(32)
Description: Compiled
Help: Sequence to cause each character to be double striked

ptr-defcpi Data type: DECIMAL (Decimals: 2)
Format: z9.99 (Initial Value: 10)
Help: The default characters per inch for this printer

ptr-deflpi Data type: DECIMAL (Decimals: 2)
Format: z9.99 (Initial Value: 6)
Help: The default lines per inch for this printer

ptr-desc Data type: CHARACTER
Format: x(28)
Help: Brief description of this printer.
Attributes: Index Component

ptr-does-binary Data type: LOGICAL
Format: Yes/No (Initial Value: No)
Help: Is this print model capable of binary operation?

ptr-draft Data type: CHARACTER
Format: x(32)
Description: Compiled
Help: Enable 'draft' mode printing (typically high-speed option)

ptr-esc-code Data type: CHARACTER
Format: x(8)
Help: Compiled 'escape' code.

ptr-graph-model Data type: CHARACTER
Format: x(12)
Help: The type of graphics device that this printer emulates

ptr-height Data type: DECIMAL (Decimals: 2)
Format: z9.99" (Initial Value: 11)
Help: Height (in inches) of form

ptr-init Data type: CHARACTER
Format: x(32)
Description: Compiled
Help: Sequence to init the printer

ptr-leadin Data type: CHARACTER
Format: x (Initial Value: &)
Help: Character used to signify the start of a special sequence

ptr-lpi Data type: DECIMAL (Extent: 4, Decimals: 2)
Format: z9.99 (Initial Value: 0)
Help: Number of Lines Per Inch

ptr-lpi-seq Data type: CHARACTER (Extent: 4)
Format: x(32)
Help: Sequence for Lines Per Inch

ptr-model Data type: CHARACTER
Format: x(12)
Help: The model name used to refer to this printer
Attributes: Index Component, Mandatory

ptr-NLQ Data type: CHARACTER
Format: x(32)
Description: Compiled
Help: Near Letter Quality mode

ptr-reset Data type: CHARACTER
Format: x(32)
Description: Compiled
Help: Sequence to reset printer to default settings

ptr-set-form-len Data type: CHARACTER
Format: x(32)
Description: Compiled
Help: Sequence to set the form length to a specified # of lines

ptr-ul-off Data type: CHARACTER
Format: x(32)
Description: Compiled
Help: Sequence to discontinue underlining of characters

ptr-ul-on Data type: CHARACTER
Format: x(32)
Description: Compiled
Help: Character sequence to initiate underlined printing

ptr-width Data type: DECIMAL (Decimals: 2)
Format: z9.99" (Initial Value: 8)
Help: Width (in inches) of the form

src-binary-init Data type: CHARACTER
Format: x(32)
Help: Sequence to switch into binary mode

src-binary-reset Data type: CHARACTER
Format: x(32)
Help: Sequence to reset from binary mode to normal/default mode

src-bold-off Data type: CHARACTER
Format: x(32)
Help: Sequence to discontinue bold printing

src-bold-on Data type: CHARACTER
Format: x(32)
Help: Character sequence to initiate embolded printing

src-cpi-seq Data type: CHARACTER (Extent: 8)
Format: x(32)
Help: Sequence to set Characters Per Inch (CPI)

src-dbl-off Data type: CHARACTER
Format: x(32)
Help: Turn double striking off

src-dbl-on Data type: CHARACTER
Format: x(32)
Help: Sequence to cause each character to be double striked

src-draft Data type: CHARACTER
Format: x(32)
Help: Enable 'draft' mode printing (typically high-speed option)

src-esc-code Data type: CHARACTER
Format: x(32)
Help: Sequence to send to printer when an 'escape' is required

src-init Data type: CHARACTER
Format: x(32)
Help: Sequence used to initialize the printer

src-lpi-seq Data type: CHARACTER (Extent: 4)
Format: x(32)
Help: Sequence to set CPI

src-NLQ Data type: CHARACTER
Format: x(32)
Help: Near Letter Quality mode

src-reset Data type: CHARACTER
Format: x(32)
Help: Sequence to reset printer to default settings

src-set-form-len Data type: CHARACTER
Format: x(32)
Help: Sequence to set the form length to a specified # of lines

src-ul-off Data type: CHARACTER
Format: x(32)
Help: Sequence to discontinue underlining of characters

src-ul-on Data type: CHARACTER
Format: x(32)
Help: Character sequence to initiate underlined printing

upd-date Data type: DATE
Format: 99/99/9999
Help: Date record was last updated

upd-time Data type: CHARACTER
Format: x(8)
Help: Time record was last updated

upd-user-name Data type: CHARACTER
Format: x(16)
Help: User who last updated this record

Created on 03/01/2019 by DBHTML V1.2